Moving a refrigerator, beer kegs or a loaded cabinet up a flight of stairs normally calls for considerable muscle—and often more than one person. The LiftKar SAL Pro approaches the job differently, adding a battery-powered climbing mechanism to an otherwise familiar hand truck.
Built by Austrian material-handling specialist SANO, the machine is designed to move goods weighing up to 170 kg (375 lb) over stairs while remaining light enough for a single trained operator to maneuver. It is intended for appliances, furniture, beverage crates, office equipment, medical cylinders and similar loads—not for carrying people.
How the stair-climbing mechanism works
On level ground, the SAL Pro rolls on its two large main wheels like a conventional hand truck. When it reaches a staircase, a powered lifting arm beneath the frame takes over. Its smaller support wheels rotate against each tread, raising or lowering the hand truck one step at a time while the operator balances and guides the load.
Going upward, the operator presses a control on the handle to start each climbing movement. During a descent, SANO says the lifting unit detects the edge of the step and begins working automatically. The motor then acts as an eddy-current brake, helping the load descend at a controlled speed.
The machine is not self-driving or self-balancing. The operator still needs to secure the cargo, maintain the correct angle, steer around landings and ensure that the staircase is suitable. What the powered mechanism does is take on much of the repeated vertical lifting that makes an ordinary loaded hand truck difficult to manage on stairs.

Three capacities balance speed and lifting power
SANO offers three lifting classes. The 110 model carries up to 110 kg (243 lb) and climbs at up to 48 steps per minute. The 140 version handles 140 kg (309 lb) at up to 35 steps per minute, while the 170 model carries 170 kg (375 lb) at up to 29 steps per minute.
The lighter-duty versions therefore trade some capacity for greater speed. The international specification lists autonomy of up to approximately 2,000 steps traveled up and down, while SANO’s US material gives more model-specific estimates: up to 2,000 steps for the 110, 1,750 for the 140 and 1,500 for the 170.
Power comes from a removable 7.2-Ah lithium-ion battery weighing 1.6 kg (3.5 lb). The US distributor says a recharge takes around two to three hours. A charge indicator, two climbing speeds and a small step light are included, along with electronic overload protection and a friction clutch.
Maximum supported step height is 210 mm (8.27 in). SANO says the mechanism can negotiate straight, curved and spiral staircases, including narrow landings, provided there is sufficient clearance for the particular machine, load and operator.

Four frames for different kinds of cargo
Rather than using one frame for every task, the SAL Pro family is divided into four principal versions.
The UNI resembles a traditional tall hand truck and is aimed at stacked or upright loads such as boxes, paper and rolls. The ERGO adds a more supportive handle layout for kegs, bottles, tires and other stacked goods. Both can be ordered with different grip styles.
The FOLD has an adjustable folding handle that helps position the operator around the load’s center of gravity. SANO recommends it for compact appliances, oxygen cylinders and equipment such as floor grinders. Its frame folds from 1,560 mm to 1,000 mm (61.4 to 39.4 in), making it easier to fit into a service vehicle.
The taller FOLD-L is intended for refrigerators, furniture, doors, windows and similar bulky items. A Dolly Kick-Out variant adds a deployable wheeled support for long level-ground movements with tall loads.
Depending on the frame, the base machine weighs roughly 15.4–17.9 kg (34–39 lb) before the battery. The Dolly Kick-Out is heavier at 22.9 kg (50.5 lb) before its battery. Standard pneumatic tires can be replaced with puncture-proof or non-marking alternatives.

Toe plates and accessories adapt it to the job
The correct toe plate is an important part of the setup. SANO offers several high-strength aluminum platforms, including wide and deep plates, V-shaped supports for cylinders and fork-style attachments for containers. Other accessories include keg and crate hooks, a six-bottle water carrier, a chair holder, support wings and a holder for doors or panels.
This range makes the SAL Pro relevant to appliance delivery, beverage logistics, construction, office moves, event production, hospitals and maintenance work. However, the weight rating alone does not determine suitability: a wide cabinet may still be too large for a staircase, and an unstable load must be secured with the appropriate strap or fixture before moving.
Pricing and availability
On SANO’s US store, LiftKar SAL Pro prices currently begin at $4,769 for selected UNI configurations. Depending on the frame, capacity, tires and toe plate, listed prices extend to approximately $7,150 for a FOLD-L configuration. US purchases include a lithium battery, charger, 55-inch safety strap, two-year limited manufacturer’s warranty and continental US shipping, according to the distributor.
Internationally, SANO sells through authorized dealers, so final pricing varies by country, accessories, training, freight, duties and taxes. Buyers should also confirm the toe plate and attachments included in a quotation, since the international base prices exclude the toe plate and its mounting block.
For delivery teams that regularly encounter stairs, the SAL Pro’s appeal is straightforward: it retains the compact form of a hand truck while adding powered assistance where a conventional dolly is least useful. It cannot eliminate the need for operator judgment or safe handling, but it can substantially reduce the repeated lifting involved in moving heavy goods between floors.
Sources: SANO International, SANO Handtrucks US


